Item 214-WL
|
22 Oz High Temp Glove
(14 inch)
|
Item 214-LWL
|
22 Oz High Temp Glove
With Leather Palm (14 inch)
|
|
High Temperature Glove with Leather Palm (Item # 214-LWL). This 22 Oz Heat resistant glove is designed for heat resistance and can handle up to 800 degrees in short durations. It is a 14" glove with KEVLAR® fiber material. The work glove has a full wool lining for added heat resistance. In addition, the high temp glove is also available with a leather reinforced palm, thumb and fingers (Item # 214-LWL).
Ideal for foundries, glass blowing, and metal forging. This glove is a very thick and large glove that is designed for heat resistance; consequently, the dexterity of the glove is extremely limited.
- Applications:
- Extreme Heat Protection
- Flame and Spark Resistance
- Foundries
- Glass Blowing
- Metal Forging
- Notes:
|
DuPont® and KEVLAR® are trademarks or registered trademarks
of E.I. du Pont de Nemours and Company or its affiliates.
|
|
|
These gloves have been designed for maximum protection in the most adverse conditions. The KP-214-DWL is a Kevlar® Fiber/PBI 22 ounce blend and can handle up to 1350 degrees for short durations.
The HKP-214-DWL is our most heat resistant glove. It is a Kevlar® Fiber/PBI 45 oz blend that can handle up to 2000 degrees in short durations.
Both styles are 14 inch gloves that are fully wool lined, have an extra large cut, and sewn 100% Kevlar® threads.
Dexterity of the gloves is extremely limited.
- Applications:
- Extreme Heat Protection
- Flame and Spark Resistance
- Foundries
- Glass Blowing
- Metal Forging
- Steel Mills
- Notes:
|
DuPont® and KEVLAR® are trademarks or registered trademarks
of E.I. du Pont de Nemours and Company or its affiliates.
|
Item KP-214-DWL
|
PBI 22 Oz Kevlar® Fiber
Wool Lined 14 Inch Glove
|
Item HKP-214-DWL
|
PBI 45 Oz Kevlar®Fiber
Wool Lined 14 Inch Glove
|
|
|
|
Ansell Edmont Crusader
Nitrile-Coated Hot Mill Gloves
|
|
|
|
For the best protection and comfort in moderate heat applications, Crusader Flex gloves are the answer. Non-woven felt insulation and a full-length heat barrier protect the worker, while two-piece construction eliminates out seams to provide better finger comfort, dexterity, and flexibility. An exclusive bonded nitrile coating helps protect against snags, punctures, abrasions, and cuts, while also enhancing dry grip. Crusader Flex gloves wear an average of four times longer than 24-ounce cotton hot mill gloves.
- Applications
- Intermittent handling of hot cores, castings,
and controls up to 400° F.
- Caution
- Crusader Flex gloves are not a replacement for silicate gloves. They are designed for intermittent handling of medium hot objects up to 400° F.
- Notes:
- Usually ships in 1 - 2 days from Texas
- Prices shown are per pair.
|
|
|
Grip N® Hot Mill - Nitrile Coated Gloves
|
|
Glove-within-glove design provides protection against high heat.
- Provides protection against intermittent heat up to 400° F.
- Nitrile palm coating provides excellent grip and longer life.
- Knit design allows hands to breathe, unlike cut/sewn hot mill gloves.
- Available with extended cuffs for additional protection above the wrist.
- Steamproof version has a three layer design: Inner layer of cotton provides hand comfort and wicks perspiration away from skin.
- Outer layer has excellent grip. Protective layer in between gloves provides resistance to steam. All three work together to provide a lightweight solution for working in hot, steamy applications.
- Complies with USDA and FDA regulations, 21 CFR, for use in food processing.
| Applications: |
- automotive assembly
- food processing
- manufacturing
|
|
|
|
|
|
|
|
|
